1.1m Width 6 Mil Vapor Barrier Film 500sqft/Roll Black Polyethylene

6 Mil Black Polyethylene Film Vapor Barrier Underlayment For Moisture Proofing

Introduction:

• Moisture Barrier is a low density Polyethylene film that can be used during the installation process with floating laminate and engineered wood floors. No need to bother with large fold-out, low quality, off-spec, construction grade films, which are bothersome and hard to use before the floor is installed.
• 
  Made with 100% polyethylene for long-lasting moisture protection
  Designed for use over most types of subfloors
  Helps protect wood or laminate floor from harmful subsurface moisture
  Covers 100 sq. ft.; roll measures 40 ft. x 30 in.
  Roll the film out and tape all seams for easy installation

How to Install

Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free of any foreign objects.

Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to keep it as even as possible across the room.

Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section using your scissors or utility knife.

Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping film on the previous section.

Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is flush up against the other piece of underlayment and on top of the overlapping film.

Step 6: Cut Section
Cut the next section of underlayment.

6 Mil Vapor Barrier Film

1.1m width Vapor Barrier Film

500sqft/roll black polyethylene film

1.1m Width 6 Mil Vapor Barrier Film 500sqft/Roll Black Polyethylene Images